Wednesday, March 9, 2011

Sterling Silver Cake Stand

L'integrazione architettonica innovativa dei moduli fotovoltaici è soggetta a nuove tariffe

Il terzo Conto Energia , entrato in vigore il primo gennaio scorso e normato secondo il Decreto Ministeriale del 6 agosto 2010, si inserisce in uno scenario di rapida crescita degli impianti fotovoltaici in Italia, dovuto sostanzialmente alle tariffe incentivanti messe a disposizione dal Conto Energia 2005, e soprattutto grazie a quelle del Conto Energia 2007. Il Conto Energia attualmente in vigore, rispetto a quanto fatto in precedenza, ha però un merito, e cioè quello di enfatizzare il ruolo dell'architettura come luogo privilegiato per l'inserimento degli impianti fotovoltaici. E per farlo, è stato scelto il modo più efficace possibile: sono state destinate agli impianti roof mounted much higher rates than all other plants, and above all have been awarded innovative applications aimed at the architecture. In this way, photovoltaic systems are no longer only the means to produce energy from renewable sources , but are promoted to the role of real building components: the PV module becomes part of the building. In fact a step in this direction had already been done with the 2007 Energy Bill that, compared to the previous one, had introduced the concept of photovoltaic partially or fully integrated. But the third Energy Bill went further. In DM 6/8/2010, in fact, innovative applications aimed at the architectural have a specific incentive rate, reserved for those plants using special modules and components developed specifically to complement and replace the architectural elements of buildings, an example for all the tiles or photovoltaic solar modules in structural glass. To qualify for these special fares, facilities must have a minimum output of 1 kW and not more than 5 MW must be installed on buildings, must use special solar modules or components, its surface must meet the requirements of complete integration of architecture, and must be connected to electricity or to small isolated systems, so that each PV system is characterized by a single point of grid connection is not shared with other PV systems. Practically, to fall into this category, the forms should replace the architectural components of buildings and must play a coating of parts of the building otherwise done by building components. As stated in Title III of DM 6/8/2010, photovoltaic systems that use special modules and components specifically designed to integrate and replace architectural elements of buildings are entitled to an incentive rate and different than the other types of plants. Keep in mind that these rates will be valid for tutto il 2011 e che nel 2012 e nel 2013 subiranno una decurtazione del 2% annuo. Anche in questo caso, le tariffe sono erogate per un periodo di 20 anni, a decorrere dalla data di entrata in esercizio dell'impianto, e rimangono costanti per l'intero periodo di incentivazione. I soggetti che possono beneficiare di questi incentivi sono: le persone fisiche, le persone giuridiche, i soggetti pubblici e i condomini. Ecco le tariffe speciali in dettaglio : Potenza espressa in kW compresa tra 1 e 20, 0,44 euro al kWh; potenza compresa tra 20 e 200 kW, 0,40 euro al kWh; potenza compresa tra 200 e 5000 kW, 0,37 euro al kWh .

Ma quali caratteristiche devono possedere gli impianti fotovoltaici per poter accedere alle tariffe speciali?

Per accedere alle tariffe speciali, gli impianti fotovoltaici devono essere realizzati con moduli e componenti particolari:

  1. Moduli e componenti speciali, sviluppati specificatamente per integrarsi e sostituire elementi architettonici di edifici quali le coperture degli edifici, le superfici opache verticali, le superfici trasparenti o semitrasparenti, superfici apribili e assimilabili quali porte, finestre e vetrine anche se non apribili comprensive degli infissi.
  2. Moduli e componenti che abbiano significative innovazioni di carattere tecnologico.
  3. Moduli progettati e realizzati industrialmente per svolgere, oltre alla produzione di energia elettrica, anche funzioni architettoniche fondamentali quali la protezione e regolazione termica dell'edificio, la tenuta all'acqua e l'impermeabilizzazione della struttura edilizia e la tenuta meccanica comparabile con l'elemento edilizio sostituito. 

Tuesday, March 8, 2011

Animated Images-sleeping

Quanto costano i pannelli fotovoltaici?

Quanto costano i pannelli fotovoltaici? I dati raccolti da Enea indicano che il costo medio di 1 kW è pari a circa 3.500 - 4.000 euro. I moduli fotovoltaici alla base di questo preventivo sono moduli ordinari in silicio policristallino . E' chiaro dunque che queste cifre possono variare, in positivo e in negativo, anche del 30%, in funzione della qualità and type of modules installed. Depending on the type of the selected panels, also changes the size. Monocrystalline panels, set in approximately 8 square meters of roof per kW, while those of amorphous silicon will take up a lot more about 20 square meters per kW. Whereas for an installation for an average family of 4 includes the installation of a 3 kW, the account is easily done: it takes about 10,500 to 12,000 euro, all inclusive, turnkey. Of course this is just an example, because the size of the plant depends not so much the number of people who live in that house, or from the surface of the property, but from what the family is energy-consuming. If you're wondering if there are other costs to consider, know that maintenance is virtually non-existent, because there will only be paid the costs of cleaning the panels.

Monday, March 7, 2011

Bloons Iphone Level Pack 3 Level 32

00:19

Sample Holographic Texas Will

Bikini, boxer, abiti e ombrelloni fotovoltaici

bras, boxer shorts and umbrellas PV! No joke! Worldwide, solar energy is harnessed to best meet the varied needs and so, in view of the beautiful season that is about to arrive, even in the field of renewable energy patents are stepping forward to say the least imaginative. Andrew Schneider, for example, who works as a designer, has invented a solar bikini nothing short of revolutionary! While remaining a garment comfortable to wear and, according of its inventor, even a little sexy bikini is covered entirely by a photovoltaic film that can store the sunlight, allowing the wearer to recharge devices such as iPod or laptop. Schneider's idea is to apply this technology to male boxer, who had a greater area, could be used to charge electronic devices particularly greedy in terms of energy consumption. But not all! The multinational company Konarka Technologies has developed Powerbrella (pictured) , a photovoltaic umbrella that can store solar energy in the evening then redistributing it to all electronic devices on the beach (from the cold bar, games, computers), thanks to a series of outlets housed on the waterfront. Konarka is now considering setting up a complete collection of clothes photovoltaic , where each fiber is made of a stainless steel wire of nanometer thick, covered with three layers of organic photovoltaic material, and another wire, covered with paste 'silver, which acts as electrodes. Another umbrella designed by Greg Freer, called Sunbrella, photovoltaic cells is characterized by two meters in diameter, can generate 280 watts, enough to power a small refrigerator, recharge your mobile phone and other electronic instruments that accompany the our daily activities.

Sunday, March 6, 2011

Underclothes For Bodybuilders

Mini celle fotovoltaiche glitter

Researchers at Sandia National Laboratories have developed a system of photovoltaic cells small as glitter, and then immediately calls "glitter cells" which could turn a person into a sort of solar battery charger, if they were applied glitter on her clothes. These cells have a diameter ranging from 14 to 20 microns (ten times smaller than traditional ones), but provide the same efficiency and, above all, greater flexibility. So much so that in the laboratories of Sandia is planning to apply them in clothing. The American military industry has already done a little thought (imagine a soldier who simply according to the Sun, also charged each communication device in this area). But also other less belligerent, like sportswear brands, have had the vision of hikers with a "solar curtains" and similar clothing. And research recently published by ScienceDaily allows anyone to be optimistic, because, having a diameter so thin, these cells can be fabricated glitter, with less cost, on an industrial scale, and produced wafers of any size: each cell, in fact, would be applied on silicon wafers and then be composed with hexagonal circuits elettrici stampati su ogni pezzo. E in questo modo, fra l'altro, se una cella risultasse difettosa, potrebbe essere isolata dal resto dell'applicazione.

Friday, March 4, 2011

Coconut Apple Cider Hair

Il Conto Energia viaggia verso l'esaurimento precoce degli incentivi

Il Conto Energia viaggia verso l'esaurimento precoce degli incentivi. La ragione di un tale rischio risiede nella poca lungimiranza del Governo nel definire un tetto massimo per gli incentivi fino al raggiungimento di 3 GW di energia prodotta dagli impianti di nuova installazione entro dicembre del 2013. Se si considera che già a settembre dello scorso anno i nuovi impianti che hanno beneficiato degli incentivi (oltre 100.000 nuove unità) hanno superato, tutti insieme, la potenza equivalente a 1,6 GW is not clear how available resources are rapidly depleting. However, this does not mean that the Energy Bill is on the whole, a negative decision in all respects, indeed, is the exact opposite. The Energy Bill, in fact, is distinguished for several positive elements. The first concerns the fact that you have reserved shares of major incentives to technology and innovative solutions: the CPV (which are reserved 200 MW) and PV highly integrated architecture (which has another 300 available MW), with rates that on average larger than those for standard PV systems. On this theme, as stated Victor Church & Energy Strategy Group of the Politecnico di Milano, can be made at least two considerations. On the one hand, this choice is intended, at least in part, to correct one of the main distortions of the incentive mechanisms of feed-in type, which limited their effectiveness in stimulating industrial research and technological innovation. Reserving a reservoir of incentives to these solutions will only encourage businesses to invest in the development and industrialization of these technologies. On the other hand, it was intended to identify and stimulate market niches particularly promising, but even where there is no clear definition of hierarchies between competing operators and where then, the game can be played even by Italian firms. The second positive aspect concerns the simplification of system types and the consequent elimination of the concept of a partially integrated system, which has sometimes produced in the last three years particularly cumbersome solutions and much more expensive for the correction of the faults of the slopes of the roofs. A benefit in particular, and here lies the advantage of legal action, the industries are small, as well as commercial and logistic activities, which at this point will have the best chance to install photovoltaic systems on roofs buildings under their responsibility.

MORE

Thursday, March 3, 2011

Time Warner Landline?

Autorizzazione Unica: quali sono gli impianti esenti?

As it was not fully implemented the directive of the Legislative Decree 387/2003 that provided for the exemption from 'One Authorization for plants built at sites without constraints and for which it is required by local authorities (Municipality, Province, Region) the issue of special authorizations provided for under the current regulations regarding the protection environment, protection of landscape and historical and artistic heritage, the facilities on the ground must be subject to proceedings for a single authorization even if built on sites without constraints. E 'was also expected to attend the Conference of representatives of the MBAC Services even if there are specific constraints, and the person responsible, in case of submission of application for a single authorization, it must make a statement to the competent Superintendents to verify the existence of proceedings or the protection of procedures for ascertaining the existence of archaeological heritage.

are exempt from the process for a single authorization and are subject to communication to the local City Hall PV:

  • attached to or integrated in the roofs of existing buildings con la stessa inclinazione e lo stesso orientamento della falda e i cui componenti non modificano la sagoma degli edifici;
  • realizzati su edifici esistenti aventi una capacità di generazione compatibile con il regime di scambio sul posto . 
Sono esenti dal procedimento di Autorizzazione Unica e sono soggetti alla DIA (Dichiarazione di Inizio Attività) recentemente sostituita dalla SCIA (Segnalazione Certificata di Inizio Attività) gli impianti fotovoltaici:

  • con potenza inferiore a 20 kW anche in presenza di vincoli;
  • realizzati su edifici esistenti differenti da quelli del precedente comma.
Sono soggetti al procedimento di Autorizzazione Unica gli impianti:

  • costruiti in siti per i quali sia richiesto dall'autorità locale (Comune, Provincia, Regione) il rilascio di specifiche autorizzazioni, previste dalle normative vigenti in materia di tutela dell'ambiente, di tutela del paesaggio e del patrimonio storico-artistico;
  • da installare su edifici in costruzione con inclinazione e orientamento diversi rispetto a quelli della falda;
  • da installare sul terreno.
Ecco quale documentazione deve presentare alla Regione il Soggetto Responsabile insieme all'istanza di rilascio dell'Autorizzazione Unica:

  • progetto definito;
  • report technical documentation available
  • area;
  • STMG prior connection or network operator;
  • certificate of urban destination;
  • receipt for payment of charges instructors
  • commitment to security to ensure that interventions disposals;
  • occurs via soggettibilità where required;
  • copy communication in supervision.
What are the sequences of the single procedure?

The legislature has provided the following deadlines for the performance of the procedure carried out only:

  • within 15 days from the date of submission of Administration shall verify the completeness of formal documentation and communicates the commencement of proceedings;
  • within 30 days from the date of submission of the administrative department shall convene the Conference of the Services;
  • within 90 days from the date of submission of 'instance of the administrative department requires additional documentation if necessary;
  • within 30 days of the request for additional documentation to the Responsible Party shall provide additional documentation;
  • within 180 days from the date of submission of the administrative authorities would find the authorization procedure single sentence compensation for harm caused by the failure to conclude.
single license:

  • supersedes any act of competence of the administrations involved;
  • is entitled to construct and operate the photovoltaic and associated works and variations to planning instrument where appropriate, includes any
  • requirements for the construction and operation of the photovoltaic system and defines the means to restore the condition of the premises;
  • determine compensatory measures for environmental and territorial expected date for start and completion of the work of installation of the expiration of the such as single license lapse. The regions may indicate
areas and sites suitable for the installation of specific types of PV systems and are forced to adapt their disciplines, in compliance with paragraph 10 of Article 12 of Legislative Decree 387/2003 as amended by the Finance Act 2008, within 90 days date of entry into force of the guidelines. If not implemented within this period, apply the national guidelines.

Wednesday, March 2, 2011

Popular Baby Phrases For Pictionary

Il cubo fotovoltaico di Pro D3 per sostituire il gruppo elettrogeno

Cube is the first photovoltaic generator solar in nature, that replace or support the generator of classical, and is proposed by D3 Pro, a company Palestrina (Roma) active in the design and installation of photovoltaic systems . Cube consists of nine squares photovoltaic modules for a maximum power of 140 Wp each, produced by Veronese SPSistem, and 6 batteries OPzS C10 12 V 100 Ah Exide production. All the metal parts entirely designed by D3 Pro has been designed by Panzironi Labico Security System (Roma). The system of opening a book was inspired by the opening mechanism that allows the satellite to maintain the compact dimensions, facilitating the handling and transport. The machine is a prototype that will create a long series of studies aimed at reducing the space and increased power. D3 Pro will join in this adventure designed especially to Third World countries, the OBS Agriculture that will give its support for setting up manufacturing plant that, in all probability, will be located in Brazil.

Tuesday, March 1, 2011

Spots In My Sons Head

Come riciclare i moduli fotovoltaici?

To recycle photovoltaic modules there is an organization specifically created called " PV Cycle" which aims to contribute to the recycling of all obsolete and decommissioned PV modules. To date, more than 70 companies are part of this international initiative that aims to build an efficient network of collection points by 2015. PV Cycle is setting up collection centers throughout Europe, where installers and citizens will be able to send the forms are no longer functional or damaged. To this end, the company "IBC Solar, to PV Cycle member, will not only contribute economically cost reductions of existing collection centers, but will materially facilitate the gathering of material, as it will be possible to deposit modules out of order at the warehouse of the company in Bavaria, where the modules are separated into crystalline and thin film and take them to a recycling center PV Cycle. The modules are sorted according to the product number and manufacturer, are then weighed, broken down into its main components and recycled. Disposal is free for installers and owners of the modules, is funded companies belonging to the association. In addition to the annual fee, defined according to the company's profits, members pay a fee determined by the weight of recycled modules.

Info: PV CYCLE • Renewable Energy House • Rue d'Arlon 63-67 • 1040 Brussels • Tel: 32 2 400 10 49 • Fax: 32 2400 10 30 • e-mail: info @ pvcycle.org

What Do They Call A Brazilian Wax In Brazil

La tenda fotovoltaica Aurora genera elettricità mentre ombreggia il balcone di casa!

to shade in summer and at the same time exploit the sun's energy to generate electricity, was invented Aurora, the first photovoltaic tent in the world. Taking advantage of the surface of the sheet, consisting of modules in silicio amorfo a doppia giunzione racchiuso in un film flessibile, Aurora trasforma i raggi solari in energia elettrica; producendo da 1 a 1,5 Kwp. Il prodotto, coperto da brevetto mondiale, si basa su una tecnologia sviluppata da Fuji Electric nell'ambito dei pannelli fotovoltaici. Tra le altre novità citiamo il sistema di arrotolamento dei pannelli in silicio amorfo per realizzare una tenda da sole. Il brevetto copre anche il sistema di connessione all'interno del rullo avvolgitore che permette il trasporto dell'energia elettrica anche mentre la tenda è in movimento e protegge, allo stesso tempo, anche i cablaggi interni rispetto all'esterno. La tenda da sole fotovoltaica Aurora è prodotta da "FRAMA" e "KF Energy" ed è certificata secondo EC law. 520x350 cm version is "grid connected" can then be connected to the network and benefit from the energy bill, in this way guarantees box office for about € 600.00 per year and at the same time saves on your electricity bill of around € 200.00 to 'year.

Monday, February 28, 2011

Ethyl Chloride Spray Can

Vei Capital scommette sull'energia solare

Vei Capital (investment holding company incorporated under Italian law dedicated to the activity of private equity and investment in infrastructure), the financial arm of the Venetian Palladio Finanziaria, accelerates in the field of energy Renewable . These days it was in fact entered into an agreement of cooperation in the field of photovoltaic NextEnergy Capital which involves the construction of four photovoltaic ground (in Sicily, near Agrigento) for a total installed capacity of about 9 MW and an investment in the order of 34 million € . Sun & Soil 2, the vehicle company set up specifically for the realization of the plants will be owned by its Vei Capital (90%) and NextEnergy Capital (10%). According to the expectations of both investors this could be just the first step towards future agreements. NextEnergy provides, in fact, to build plants in the coming years to around 700 MW of which about a hundred could be achieved with a Vei Capital. The operation itself, as well as demonstrate the growing interest of financial players in the field of renewable energy, particularly photovoltaics, is interesting because it is the first closed Vei Capital investment, which is the Venice European Investments made by Assicurazioni Generali, Banca Veneto and Palladio Finanziaria. Vei Capital is a leading investment vehicles born in recent months with a parterre of players of great weight, first of all, the insurance company in Trieste, a vehicle with an initial budget of 400 million that could rise to 600 million. In short, a truly impressive case that could be invested in traditional private equity target, or just in renewable energy and infrastructure. Moreover, Vei Capital has replaced the bottom Valiance, which ceased its operations last year. The operation carried out by Vei Capital in the photovoltaic sector is the first financial close by the operator, although in recent weeks, the financial arm of Palladio formalized, adding Investindustrial, the purchase of a majority of Snai, active group betting horse. Palladio is worth noting that its shareholder group through the General Ferak: with a market share of approximately 3.9% to cost of the package (the 1, 6%) held directly and the remainder (2.26%) indirectly held together with the Fondazione Cassa di Risparmio di Torino through Effeti.

Brazilian Wax Male Jacksonville Fl

Solarwindows il pannello fotovoltaico spray con polimeri conduttivi trasparenti

Solarwindows is a patent-pending technology developed by New Energy Technologies, which could transform the windows of the house in true solar panels capable of picking up even artificial light and transform it into electricity, thanks to tiny solar cells sprayed directly onto the transparent surface. Micro solar cells, in fact, are made transparent conductive polymers that can be dissolved in liquid and applied to the surface using a spray solution. The material used for the tiny solar cell, with dimensions of less than 1 / 4 of a grain of rice, has the same properties del silicio ma con una capacità di assorbire la luce, e trasformarla in elettricità, di gran lunga superiore. Questa avveniristica tecnologia va ben oltre il concetto di pannello fotovoltaico così come noi lo intendiamo e promette di rivoluzionare il settore offrendo soluzioni di facile applicazione a dei prezzi contenuti, rendendo accessibile questa fonte di energia rinnovabile praticamente a chiunque.

Sunday, February 27, 2011

How Do Doctors Do This And Is It Safe?

E' nata Nausicaa la mini turbina Wooden wind ideal for gardens of houses

Un'interessante novità nel settore dell'eolico domestico è in arrivo da Pesaro. Si tratta di Nausicaa , una mini turbina eolica in legno ideale per i giardini delle abitazioni. Nausicaa è stata ideata ed è commercializzata dall'azienza Macht Ltd Pesaro, which has long decided to produce its own equipment using only biocompatible materials and recyclable. The blades are made of natural wood and structures are made of recyclable aluminum. Nausicaa is easy to install, has a diameter of two meters and weighs 25 kg and is designed to operate in "stand alone" in connection to the mains via an inverter, which is a converter of electricity to alternating. The power ranges from 0.4 to 1 KW / p.

16th Birthday Jewelry For Friend

A high performance plastic solar panel on their way from Canada

The research group of the National Research Council National Institute for Nanotechnology, together with a team from the University of Alberta, both in Canada, have successfully completed a research project aimed at developing a prototype solar panel plastic able to overcome the few hours of activities that are currently the standard. The research team, led by David Rider, has managed to develop a polymer more resistant and durable than those now used to construct the electrode of the solar cells and solar cell prototype made properly it worked well for 500 hours and Even more importantly, has subsequently continued to work for almost eight months before being damaged irreparably (although, it seems, more to the continuous transport between a laboratory and the other not to a degradation of the material).

Saturday, February 26, 2011

Thank You After Interview Cosmetics Job

Because use of renewable energies?

, renewable energy technologies could be used alone or in combination, provide many benefits both in terms of the achievable savings, and on that investment itself. Now the scenario is ripe, most of the technology is reliable and not on any investment market that is able to provide, such as photovoltaics, a yield of 7% per annum consistently for 20 years. What is lacking, however, is information that is able to undermine a conception of the investment in renewable energy as viable only if linked to a long time horizon, which discourages many people who also have the potential to invest in these technologies. One of the picks

that could change the dynamic behavior is related to photovoltaics that now, after three years, has set in motion, both in terms of large plants in both the domestic, investment firm, thanks to the encouragement of the Energy Bill, and that paying only only their energy, has made very clear, with regard to viability and thus the bankability of this renewal. Increasingly, renewable energy can be used in combination with each other. Some new single-family homes are, for example, with ever since the construction of photovoltaic systems, solar thermal and geothermal, all technologies related to energy efficiency systems make the houses very passive, ie producono più energia di quella che consumano. Le aziende, inoltre, possono fare un investimento sul medio termine per abbattere il costo dell'energia, utilizzando sistemi a fonti rinnovabili. Anche in virtù del fatto che nei prossimi anni il costo dell'energia tradizionale sarà destinato ad aumentare.

Il panorama degli incentivi per le rinnovabili in Italia è variegato. Si va dal Conto Energia per il fotovoltaico, alla tariffa omnicomprensiva, passando per i certificati bianchi. Da non sottovalutare, inoltre, tutte quelle misure legate all'efficientamento energetico che prevedono l'incentivazione delle rinnovabili, come nel caso del solare termico che gode della detrazione del 55%. Inoltre, in alcuni casi le Regioni si sono activated to provide additional incentives that are integrated with those of the state.

Among the renewable technologies most commonly used include:


  • Photovoltaics, Solar Thermal
  • ;
  • low enthalpy geothermal ;
  • Mini hydroelectric ;
  • Mini wind .
PHOTOVOLTAIC

Small, medium and large PV systems today are more renewable energy systems installed in Italy, thanks also encouraging that even with the new Energy Bill will remain the next three years, despite the reductions, very interesting. Photovoltaics is the most versatile renewable, available and adaptable to user needs and conditions of installation. Unfortunately, to date, there are still a number of difficulties with the installation of PV on condominiums, but anyone with a flap detached house facing south, with no shade can install it with good results. The same goes for companies that provide coverage and industry are able to save on phone bills, thanks to the exchange on place and have an additional income. Many banks financing photovoltaic systems in ways that allow an advance at the expense of lower overall profitability, very small compared to the total investment.

SOLAR THERMAL

The European Union defines the solar heat as the sleeping giant, both because of its enormous potential both for being a non-renewable electricity , which is to have a clear virtuoso on that big slice of consumption associated with the use of thermal energy. Today's solar thermal investment costs low is with regard to the household sector, for sanitation purposes, for both businesses, for which you may want to use the high thermal efficiency combined with the recovery of heat from industrial processes. For both sectors, and the service sector, it is interesting to use solar heat for the cooling (solar cooling), which allows the use of solar energy combining with the increasing demand for greater availability of cold. Regarding the reliability solar thermal systems are now sufficiently standardized and reliable.

low enthalpy geothermal

renewable Geothermal energy is a little known but which may offer good potential. The relative youth of the technology, its applicability only in particular contexts such as new construction, renovations and where you have sufficiently large areas of land are all factors that have led to achieve even a few installations in Italy. Geothermal energy has been successfully applied in the housing units but is particularly suited to commercial, where they often build new facilities such as offices and shopping centers. In such cases, where the works for geothermal wells in parallel following the work of foundations, its application becomes convenient, as long as you are on a site with good features for the exchange of geothermal heat.

MINI HYDROPOWER

It 's the renewable discounts not applied because the need for major works that make it very suitable for home use, although there are generators that can be used cheaply into waterways like streams. The need to alter the course of rivers and streams, even with the systems to read fluently, often submit the mini hydro, to a considerable authorization process. It is a renewable resource that can be used con profitto da aziende che hanno la disponibilità di un corso d'acqua o di una pubblica amministrazione che dispone magari di un impianto dismesso negli anni sessanta a seguito della nazionalizzazione dell'energia elettrica. Gli attuali sistemi di telecontrollo consentono di realizzare impianti non presidiati da operatori, cosa che in molti casi ne minerebbe alla base la redditività. A fronte di investimenti importanti i sistemi mini idroelettrici sono caratterizzati da una lunga durata che può arrivare a svariati decenni.

MINI EOLICO

Il mini eolico è caratterizzato da una buona facilità e rapidità installation and an equally serious viability pact to be in an area with adequate wind speed. For this reason it is necessary, not to make an investment in vacuum or deficit, making accurate and effective analysis in the field of long-term to get a picture about the exact location of the wind in which to install the wind turbine. Wind maps available, in fact, are not sufficient, because with small wind turbines, whose towers are also a few meters, you can come into play factors like the presence of trees and buildings in changing winds in the area. Today, technologies and materials available for small wind turbines are increasing and are on the market of vertical axis turbines are capable of working both with winds that strong.

Friday, February 25, 2011

Closest Walk In Clenic

may want to install a cogeneration plant?

Cogeneration is a term that is inherent in the simultaneous production of electricity and heat in order to maximize efficiency. In other words, the fuel, rather than simply to burn in a boiler to produce heat, is also used to produce electricity or vice versa, depending on the type of plant.

CHP plants have existed for many years, but it is only recently that are becoming more widespread, thanks to technological advances that have reduced the costs of these systems. CHP plants can be divided into four categories, depending on the energy produced:


  1. Micro CHP, with production of less than 50 kW;
  2. small scale, with production exceeding 1 MW;
  3. Media cogeneration, producing between 1 MW and 10 MW cogeneration
  4. Grande, producing over 10 MW.
The difference obviously lies in the size of the plant and the power supply, but also relates to the priority given to the production, examining the types of smaller and more common, a micro cogeneration plant, the priority is directed mainly towards the production of heat and electricity as a byproduct, whereas in a small cogeneration plant happens more often the opposite, namely the heat is to be a byproduct of electricity generation .

But how should install a cogeneration plant?

At this time, the production cycle to produce electricity to heat the portion not converted to electrical energy is converted more of the party: the heat is not used so often to top 'energy useful electrical. The average yield in the central Italian is, in fact, just over 40% which is necessary to remove the losses due to the distribution network. To produce 1 kWh of electricity, therefore, it must burn 2.3 kWh of primary energy produced by the fuel. The combined production of electricity and thermal energy through a cogeneration system with an efficiency approaching 90%, reducing losses due to transmission and distribution. Burning 1 cubic meter of natural gas in a cogeneration plant can produce about 5 kWh of heat and about 4 kWh of electricity. This efficiency means that the payback time of no greater than 5 years, assuming use of the system per almeno 6 mesi l'anno.

A seconda della produzione elettrica che si vuole raggiungere ci sono varie tecnologie utilizzabili restando sotto al megawatt di potenza, ovvero per gli impianti di micro e piccola cogenerazione, probabilmente i più interessanti dal punto di vista produttivo: dal fotovoltaico al mini eolico, per arrivare alle micro turbine a gas. Il più diffuso, però, è il motore a combustione interna, in grado di coprire un'ampia gamma di fabbisogni. Questo sistema, detto anche motore endotermico , è uno dei più diffusi, anche grazie alla sua affidabilità. E' composto da un motore a 4 tempi alimentato a metano, gpl, biogas o altro, ed è ottimizzato per funzionare al meglio a determinate temperature, accoppiato ad un alternatore trifase e controllato da un sistema elettronico di regolazione, indispensabile anche per gestire tensione e frequenza della corrente ed evitare così disturbi sulla rete. L'impianto funziona in parallelo alla normale rete elettrica e può lavorare in modo asincrono o sincrono: in quest'ultima modalità il sistema è in grado di lavorare in condizioni d'emergenza, ossia di fornire energia elettrica in caso di mancanza di corrente dalla rete. I vantaggi di un motore di questo tipo sono l'elevata affidabilità, i buoni rendimenti, i ridotti costi e l'elevata flessibilità. Per contro, tra gli svantaggi segnaliamo, i costi di manutenzione, la rumorosità e le vibration.

From the standpoint of efficiency, an engine can produce about 35% - 40% electricity and 50% of thermal energy, with only 10% - 15% losses. By way of comparison, other systems (such as gas turbines or steam turbines) are equally effective but with a smaller percentage of electricity generation, for the benefit of heat production caused by steam. The system uses a lean burn engine, combined with an effective cure, contributes to the low emission of polluting gases, provided for by the more recent European standards, more and more restrictive in this sense. For example, a cogeneration plant to natural gas allows a saving of carbon dioxide of about 500 g / kWh compared to separate production of electricity (power plant) and heating (conventional boiler).

A cogeneration system based on combustion engine can be placed inside the same boiler room, or even outside, in a special sound-proof container. The choice depends on the space you have available but also choices about the visual impact and noise as well as safety and ease of maintenance. Given the size and characteristics of the system, a system of this type can be used all'interno di condomini, ospedali, alberghi, comunità, oltre che nella piccola e media industria, laddove vi sia una forte richiesta non solo di elettricità ma anche di acqua per uso industriale. Nonostante sia possibile alimentare un motore di questo tipo con vari carburanti, è innegabile che il metano è la scelta più probabile, vista la disponibilità stabile di combustibile e la diffusione capillare della rete distributiva.

Scendendo più in dettaglio, un impianto di cogenerazione è costituito da 4 elementi collegati tra loro: il motore primario, il generatore elettrico, il sistema di recupero termico e le interconnessioni elettriche. Nel caso venga usato un motore a combustione interna, questo è usato per convertire l'energia del combustibile in energia meccanica; il generatore collegato la converte in energia elettrica mentre il terzo componente, il sistema di recupero termico, raccoglie l'energia termica dispersa e la converte in calore utilizzabile. Per finire, il quadro di connessione elettrico, collegato sia alla rete interna che alla rete nazionale, provvede alla distribuzione.

Da questa breve descrizione si può capire come la produzione di calore generata dal sistema di recupero sia in pratica gratuita, visto che corrisponde ad uno scarto derivato dalla produzione di energia elettrica e termica. Da non sottovalutare è poi la possibilità che ha il gruppo di cogenerazione to be used as an emergency system, as it could make a generator. Indeed, a system of this type helps to differentiate the heat production and supply of electricity: for this combined benefits of energy efficiency certificates (or white certificates) evidencing the achievement of an energy saving of primary energy.

What Shade Of Blonde Am I

Uniti per forza, di Federico Pirro


Come recita il sottotitolo del frontespizio, il libro di Federico Pirro è un saggio antologico, ampiamente commentato, di brani di scrittori importanti che hanno parlato dei fatti che portarono alla cosiddetta unità d'Italia. Sono presenti oltre ad autori a noi contemporanei anche autori contemporanei ai fatti che si svolsero 150 anni fa. Se ne deduce che non tutti gli autori sono stati organici al potere e tromboni della storia scritta dalla parte dei vincitori e per osannarli. Anche se chi ha tentato di presentare e spiegare le ragioni dei vinti non ha avuto gli spazi, accademici e divulgativi, degli altri. Anzi sono stati boicottati o ignorati. Ora something is changing and Pirro's book bears witness. There are many books of this nature, fresh off the press, which are occupying significant space on the shelves of libraries. For some authors cite only "popular" they give, although to varying degrees, the defeated voice of so-called revival: April Pino, Giordano Bruno Guerri, Caprarica Antonio, Gigi Di Fiore, Eugenio Bennato, Lino Patruno, but there are many others books published by publishers of all sizes, who speak of "bandits" The unification of the South "bandits" of the time, I repeat once again, we assume an exclusively positive connotation, are in fact insurgents and partisans who lottato in difesa della loro terra, delle loro famiglie, della loro dignità. Scrive Pirro: «Può dunque dirsi, fuori da ogni faziosità, che il termine “brigante”, per l’evoluzione che hanno avuto gli avvenimenti, si distanzia sempre più da “bandito” per avvicinarsi sempre più a “partigiano”».
Federico Pirro ritiene che l’unità d’Italia era ineluttabile. «Infatti, – scrive – se, nonostante gli errori, l’elitarietà dei sostenitori, le brutalità, se, nonostante tutto questo, la penisola è diventata una, abbiamo la riprova evidente del fatto che, prima o poi, si sarebbe giunti a questo risultato». I, too, until not long ago, I was convinced that the unification of Italy was made, but not with the manner in which it was almost done. Now I begin to doubt this ineluttabiltà. However, but it is absolutely necessary to come out the other story, that the vast majority of the inhabitants of the former Kingdom of Two Sicilies, in which the unit was imposed by force, with weapons. In the words of Eugenio Scalfari, cited by Pirro, the Risorgimento was the work of a minority and this is his weakness. Catholic masses, peasants, workers, were absent and excluded from the institutions.
Luigi Pirandello writes that his Sicily was treated as a land of conquest: "Poor Islanders, treated as necessary to civilize barbarians. "
But the Kingdom of the Two Sicilies was criminalized to provide the pretext for a war of conquest. The Kingdom was not the country of plenty, says Pirro, but it was not worse than others, indeed, in many ways maybe it was even better. The decline of Meriodione began with the invasion of Piedmont and their war of conquest.
The first Italian railway was built in the South in 1839 (the Napoli-Portici, which was not quite as propaganda Savoy called it a "real toy") and included in the draft two large dorsal Ferdinand II. The first was to connect Brindisi to Naples, then go up to Pescara, Ancona and Bologna, via Venezia, join networks Danube and Rhine. The second column, starting from Calabria and Basilicata, linked up with Rome, Florence, Genoa and Turin. This plan was based on mining rail Calabrian Mongiana, producing steel, and technological growth of the complex engineering of the Neapolitan Pietrarsa.
During the Bourbon Kingdom was built on the Garigliano's first iron suspension bridge built in continental Europe (1832), was built in Naples the first gas lighting in Italy (1839), was installed the first observatory on Vesuvius volcanic world (1841), was launched the first steamboat propelled propeller that has crossed the Mediterranean (1847). At the time of unification
heritage of the Kingdom of the Two Sicilies was 443 million gold ducats, which at that time corresponded to 60% of the assets of all the pre-unification states and small states combined.
But then in the country that mattered most in the world, England, was decided, for its business interests, that the throne of the Kingdom of the Two Sicilies had to be destroyed. The operation - Lorenzo Del Boca writes in his "Damn Savoia" - was long thought out and scientifically planned in secret. In Britain, the United States of America and Canada were collected three million French francs, equivalent to 29 billion lire. With that huge sum was financed l'operazione Garibaldi (cosiddetta spedizione dei Mille) e furono comprati quasi tutti gli ufficiali dell'esercito borbonico.
L'annessione piemontese, scrive Pirro, ha avuto caratteri che non divergono molto dai genocidi seguiti, nei millenni, a ogni conquista. Il Sud lo si può ben raffigurare come una sorta di riserva indiana, simile a quei campi di concentramento che videro la graduale eliminazione fisica dei Pellerossa. Al minimo tentativo di ribellione, si organizzavano deportazioni verso le fortezze del Nord (i lager dei Savoia a Fenestrelle, dove furono fatti morire migliaia di prigionieri della guerra del Sud e disertori napoletani che non vollero passare nelle file dell'esercito nemico); chi non si fidava del “nuovo”, diveniva un brigante da giustiziare senza processo. Era prevista la fucilazione immediata se un contadino veniva sorpreso con una porzione di pane superiore a quella che, a parere dei boia piemontesi, doveva essere sufficiente per un giorno, perché quel di più nella bisaccia era la prova che si foraggiavano i soldati borbonici datisi alla macchia.
Antonio Gramsci così bollò con vigore la ferocia piemontese: « Lo Stato italiano è stato una dittatura feroce che ha messo a ferro e a fuoco l'Italia meridionale e le isole, crocifiggendo, squartando, seppellendo vivi i contadini poveri che gli scrittori salariati tentarono infamare col marchio di briganti » .
I briganti più Note, summarizes Pirro, were the Puglia and Basilicata Pasquale Romano Carmine Crocco, that their men have for several years hard time Piedmontese army. The robbers were joined by the Southern generals and foreign officials, the most famous of these was the Spaniard José Borges.
Pontelandolfo, Casalduni and many other countries were flattened and burned because they dared to rebel against the "liberators".
more you read the information on the birth of the Italian State - writes Pirro - and the more I became convinced that the "southern question" was designed precisely with the robbery of the Southern Piedmont, to the detriment of the people. And the southern
to escape from poverty and conditions of robbery by the new state were forced to emigrate. Only during the years 1806 to 1915 left Italy for six million poor South. This was the result of decades of neglect and exploitation of the areas most vulnerable politically. Crippled by the rapacity of Piedmont, which took hold even of the tracks to transfer to the North. And the biblical exodus of southerners continued in subsequent years.
Gaetano Salvemini wrote in 1899 that Garibaldi's expedition was an act of conquest itself, the province of Naples and Sicily, when they entered a part of Italy, had no debts, the Southerners were forced to pay the interest on debts made by the first North Unit. The Unification of Italy - yet Salvemini wrote - was a disaster for the South was right and the last king of the Bourbons, when, flying from Naples to Gaeta, told his former subject: " I lose the kingdom but the Piedmontese you leave only the eyes to weep ".
Federico Pirro's book discusses many other topics, including Cesare Lombroso, the Fasci Siciliani Workers, fiscal federalism, the Cassa per il Mezzogiorno, the Camorra, the mafia, the 'Ndrangheta, the Resistance in the South of 'Italy.
I close this review with the consideration with which Fred Pirro closes the annotated chronology of the events in Italy from 1800 to 1861, located at the end of the book: " On March 17, 1861 Vittorio Emanuele assumes for himself and his descendants the title of king of Italy, but remains and II I do not, as would have been legally and politically correct she was born a new reality. This particular confirms that it was a conquest rather than unification. All the injustices following the events listed, still living to 150 years away, were the inevitable result of these first acts ".
Rocco Biondi

Federico Pirro, United Force, 1861-2011, Essay anthology , Progedit, Bari 2010, pp. 182, € 20.00

Thursday, February 24, 2011

Straighteners With A Life Time Warranty




Clashes with the devastate me unconscious . And I will destroy, sooner or later, more than they already do now;
and keep repeating those words that resound in the air and do more harm than ever. And then?
And then collapse. But what is the bottom? The answer is simple: nothing, or rather, worse.

CE LA POSSO FARE . Tutte noi ce la possiamo fare. L'importante è crederci. Crederci più di ogni altra cosa, e lottare fino alla fine. Non importa quanto cazzo sarà difficile. E' il momento di passare alla seconda fase e rendermi conto della verità. 
Perché adesso non ho intenzione di guarire, ancora devo concludere questo 'bellissimo' viaggio in cui mi sono inoltrata già da tempo ma che sembra avere lo stesso paesaggio di sempre. Insomma, si tratterebbe di prevenire una malattia che per ora è soltanto un sintomo.
E poi, ora sono più grassa che mai. Fanculo tutto. Solo il silenzio there seems to be really, I dive there, but I have not yet touched bottom.


* Nessi.

Wednesday, February 23, 2011

Navel Pain Before Peeing

photovoltaic roof Snail

The Snail photovoltaic roof covering is an innovative solution that enables the production of energy from solar sources. E 'designed to meet every need and, thanks to a dynamic and modular design concept can be developed and customized as needed. It occupies an area the size relatively small (at least 14.5 square meters), is made of photovoltaic panels Suncase MX 60 highly efficient, with a total capacity of 1.840 kWp produces electricity that can be used for own consumption, sale to the grid and used to power any type of electric vehicle. Ideal in the service of bike sharing, Snail can be used in any context where a solution is required shade and weather protection. The solid structure that's attractive and offers a broad functional area to customize panels, mats or used to support climbing plants. We can use it as an area for storage of bicycles and motorcycles, or shelter as to create shadows on the edge of the pool. The structure is made of tubular high-pressure treated by sandblasting and galvanizing the bottom base, the powder coating drying oven ensures the absolute resistance to weathering and exposure to the sun and low temperatures. The shelters can be paired and assembled into groups of different length. The height, the lowest point that is 2 meters and the highest point of 2.7 meters, also allows for convenient storage of cars. Each shelter, which measures 4.13 x 3.37 meters, supports eight photovoltaic module SUNCASE 230Wp MX 60 from a total capacity of 1.840 kWp a surface area of \u200b\u200b14.40 square meters. The photovoltaic module Suncase MX 60 is composed of 60 multi-crystalline silicon solar cells, square with sides of 156 mm, high efficiency and electrically connected in series. The front glass, low iron oxide has a thickness of 4 mm, and its surface reduces light pollution and optimizes the transmission on photovoltaic cells. The junction box, with 3 bypass diodes, cables and polarized connectors, has a degree of protection IP 65, to guarantee the best defense against hot-spot phenomena. The module is equipped with anodized aluminum frame is resistant to twisting and static loads. Measure length of 1665 mm and 1005 mm wide. The MX 60 is available Suncase with capacities ranging from 210 Wp to 240 Wp, also in black and can be supplied without frame (frameless). Your use of Suncase MX 60 installation in residential or industrial integration as a partial or total replacement of roofs on roofs, as well as on bus shelters or on areas of land, offering the guarantee of a better system performance over time. The module can be supplied with an integrated system for remote monitoring in support of operations control and management of the services offered in the O & M of MX Group.

Tuesday, February 22, 2011

Welcome Visitors At Church Samples

new photovoltaic modules Conergy Power Plus

The module is the heart of ' photovoltaic system, the place where electricity is produced. What is wasted here can not be compensated even by the most ingenious design. Therefore, in the production of its modules, Conergy has decided not to make any compromise on quality and aim to continuously improve performance. Conergy modules in Frankfurt Oder in Germany, one of the most modern solar plants in the world, where the integrated chain of production wafer-cell-form, the high level of process automation, and continuous and accurate controls ensure the high quality of finished product. These modules are equipped with special technical features and design that increase performance, functionality and appearance.

modules on the market have a tolerance of power varies mostly between -3% and +3%. This indicates that the effective power of a 200 W module can be up to 6 watts less than the nominal power. This results in considerable economic loss of over 20 years of the photovoltaic incentive: whereas the rate of 0.48 € per kWh, for a 6 kW system, for example, loss of earnings amount to more than 2000 € .

I modules Conergy Power Plus have tolerance power exclusively positive and this ensures that the customer gets not only from the photovoltaic performance and projected revenues, but even better results than those estimated in the draft stage. Tolerance Positive means greater energy efficiency and economic security and greater investment. But not only because the sale price of the modules is based on the rated Wp, the positive tolerance allows you to pay for a given power and have, on average, a more effective power.

The regulations require that the performance of photovoltaic modules are measured in standard laboratory conditions, providing an irradiation of 1000 W / m and a cell temperature of 25 ° C. These conditions correspond to a situation of bright sun and no clouds, which rarely occurs in real operating conditions of the PV system. In foggy or cloudy days, as in the first morning or evening, the average radiation that reaches the photovoltaic module has a value below 1000 W / m and, even in a sunny location, it is estimated that the module works, 80% of the time, with irradiation between 200 and 900 W / sq.m. It 'so obvious that it is more advantageous to use modules with high efficiency values \u200b\u200bin this range of radiation.

Although widely accepted that the efficiency of crystalline silicon solar module is reduced with decreasing irradiance, the modules Conergy Power Plus, in the range between 1000 and 500 W / sq m, have an efficiency curve increasing with decreasing irradiance. between 250 and 999 W / m, also the efficiency is always greater than the standard, measured at 1000 W / m. Under conditions of low irradiance (200 W / m) Finally, the Conergy Power Plus show a relative reduction in the efficiency of 2%, up to three times less compared to other modules on the market, which amounted to values between 4 and 6%.

Saturday, February 19, 2011

Wifi External Hard Drive

The strength of a wind

The strength of a wind is also its limitation. To work needs and our wind is known as the land of sun, no wind. The perception we have of this energy is mostly influenced by our habits. In the Po Valley, for example, would be required to define a windy day that the sea would be a completely normal day. Who lives on an island is accustomed to the airflow so that we do not notice it, while those used to calm can be annoying and unbearable that normally might be called a breeze. Beyond our perceptions, therefore, it is important to determine objectively the amount and speed of wind present in a given area. For this we can rely on wind atlas of Italy to get an idea on the wind in our area and the average productivity. The speed is often indicated in meters per second, and sometimes in km / h. It 'important to know that a wind turbine has its massima efficienza alla velocità nominale dichiarata: per fare un esempio, se un generatore produce 1 kW a 12 m/sec (circa 50 km/h), probabilmante inizierà a muoversi già a 4 m/sec ma in queste condizioni la sua produzione è insignificante. Cresce, invece, in modo quasi esponenziale con l'aumentare della velocità fino a raggiungere le condizioni ottimali di produzione al raggiungimento dei dati di targa. Se la velocità del vento è superiore, il generatore non produce di più, ma anzi diminuisce. La superiore velocità ingenera un maggiore logorio delle parti meccaniche e un surriscaldamento della parte elettronica. Per questo motivo i generatori inglobano uno o più sistemi, elettrici o meccanici o entrambi, atti to limit the speed of the rotor is also a safety feature to prevent high winds produce damaging stresses the entire structure. It is therefore essential to know the nature of the wind in our area, its average strength and, therefore, choose a generator that can respond as to the strength we have. In addition to consulting the wind atlas of Italy, it is good to run the tests to determine the exact location in which to install the generator, its height above the ground and then out the features.
Wind Atlas Italy

Safest Hybrid Suv 2009

Federico Pirro ai Sabati Briganteschi


Saturday, February 26, 2011 - Hours 18.00
Council Chamber City of Villa Castelli (Brindisi) - Piazza Municipio

part of the "predatory Saturdays (last Saturday of each month), organized by the" Week Briganti - the other story, "

FEDERICO PIRRO
chief of the headquarters of Rai Bari
presents his book published by Progedit
U.S. to force

certainty that there is a growing feeling that 1861 was not the seal of a process that had played a full and well the delicate preparatory phase, but everything is rushed and driven by the unexpected, that it is like using say, sailed to view. In short, a conquest to achieve and consolidate by any means, barbarized by staggering the damage which the South was another continent, inhabited by people when it was most appropriate, if not indispensable, to give a kind of "rehabilitation", not even with perennial massacres and the laws of war, comparable in form, and perhaps even in the pre-ordained purpose, the genocide of Native Americans. The events, moreover, coincided also in terms of time.
analysis, albeit briefly, the policies implemented by the Bourbons, and in particular by Ferdinand II, one can grasp that, for those times in which absolutism was essential character of governance, aspects emerge clearly positive. It also includes that too long these positive aspects have been kept in silence, with the clear purpose of giving the South wins the historic character of the need to free those people from backwardness and despotism.
There is still wonder if the heavy criticism of the South, often mocking, others were not, and still are, that propaganda, as always in support of the winners and losers of the damage. (Federico Pirro)

Federico Pirro was Head of the "Gazzetta del Mezzogiorno", the founding and for many years, Bari, correspondent of the "Republic" editor Rai seat of Bari in 1997 He was awarded the Prix Saint-Vincent in journalism for a series of TV Albanian immigration. Engaged in a long trade union, has served as vice president of the National Press Federation.

Presentation of the magazine
Brigantaggio - Political and social
To all those present will be offered a free copy